|Pages (from-to)||2954 - 2960|
|Number of pages||8|
|Journal||IEEE Transactions on Antennas and Propagation|
|State||Published - Sep 2010|
Previous enhancements to the finite difference time domain method have facilitated the analysis of structures such as those containing sharp metal edges which are aligned with the mesh or of smoothly curved metal objects. So far, however, there has been little work on the often encountered situation of thin metal edges which are inclined at an angle to the mesh other than for the special case of diagonal orientation. In this paper, the general case is examined and it is shown that the concept of modified assigned material parameters (MAMPs) can be extended to provide an effective and accurate means of treating this problem. Results are presented for curved microstrip patches, arbitrarily inclined rectangular microstrip patches and for the more complex case of a coplanar fed bow tie slot antenna.
Rose publication type: Journal article
This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of the University of Bristol's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to email@example.com.
By choosing to view this document, you agree to all provisions of the copyright laws protecting it.
- edges, finite difference time domain (FDTD), modified assigned material parameters (MAMPs), singularities