Skip to content

Composites University Technology Centre (UTC)

Organisational unit: Research Sub-grouping

61 - 70 out of 850Page size: 10
  1. 2019
  2. Published

    Impact of hybrid composites based on rubber tyres particles and sugarcane bagasse fibres

    Moni Ribeiro Filho, S. L., Oliveira, P. R., Panzera, T. H. & Scarpa, F., 15 Feb 2019, In : Composites Part B: Engineering. 159, p. 157-164 8 p.

    Research output: Contribution to journalArticle

  3. Published

    Thickness effect on Mode I trans-laminar fracture toughness of quasi-isotropic carbon/epoxy laminates

    Xu, X., Paul, A. & Wisnom, M. R., 15 Feb 2019, In : Composite Structures. 210, p. 145-151 7 p.

    Research output: Contribution to journalArticle

  4. Published

    Numerical analysis of resin-rich areas and their effects on failure initiation of composites

    Ghayoor, H., Marsden, C. C., Hoa, S. V. & Melro, A. R., Feb 2019, In : Composites Part A: Applied Science and Manufacturing. 117, p. 125-133 9 p.

    Research output: Contribution to journalArticle

  5. Published

    The effect of voids on matrix cracking in composite laminates as revealed by combined computations at the micro- and meso-scales

    Mehdikhani, M., Petrov, N. A., Straumit, I., Melro, A. R., Lomov, S. V. & Gorbatikh, L., Feb 2019, In : Composites Part A: Applied Science and Manufacturing. 117, p. 180-192 13 p.

    Research output: Contribution to journalArticle

  6. Published

    A numerical study of variability in the manufacturing process of thick composite parts

    Matveev, M. Y., Belnoue, J. P. H., Nixon-Pearson, O. J., Ivanov, D. S., Long, A. C., Hallett, S. R. & Jones, I. A., 15 Jan 2019, In : Composite Structures. 208, p. 23-32 10 p.

    Research output: Contribution to journalArticle

  7. Published

    Comparing the effect of geometry and stiffness on the effective load paths in non-symmetric laminates

    Minera Rebulla, S., Patni, M., Weaver, P., Pirrera, A. & O'Donnell, M., 7 Jan 2019, AIAA Scitech 2019 Forum. American Institute of Aeronautics and Astronautics Inc. (AIAA), 13 p. AIAA 2019-1766. (AIAA Scitech 2019 Forum).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  8. E-pub ahead of print

    Efficient 3D Stress Capture of Variable-Stiffness and Sandwich Beam Structures

    Patni, M., Minera Rebulla, S., Groh, R., Pirrera, A. & Weaver, P., 6 Jan 2019, AIAA Scitech 2019 Forum, 7-11 January 2019, San Diego, California: Session: Composite Interlaminar Enhancement Methods and Modeling II. American Institute of Aeronautics and Astronautics Inc. (AIAA), 22 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  9. Published

    Structural Modelling of Compliance-Based Morphing Structures under Transverse Shear Loading

    Rivero, A. E., Weaver, P. & Woods, B. K. S., 6 Jan 2019, AIAA Scitech 2019 Forum. San Diego, California: American Institute of Aeronautics and Astronautics Inc. (AIAA), 17 p. AIAA 2019-0229. (AIAA Scitech 2019 Forum).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  10. E-pub ahead of print

    Design, Manufacture and Test of an In-Situ Consolidated Thermoplastic Variable-Stiffness Wingbox

    Weaver, P., 2 Jan 2019, In : AIAA Journal.

    Research output: Contribution to journalArticle

  11. Published

    Auxetics and Other Systems of Anomalous Characteristics

    Wojciechowski, K. W., Scarpa, F., Grima, J. N. & Alderson, A., Jan 2019, In : physica status solidi (b). 256, 1, 4 p., 1800736.

    Research output: Contribution to journalEditorial

Previous 1...3 4 5 6 7 8 9 10 ...85 Next