Skip to content

The structural efficiency of the sea sponge Euplectella aspergillum skeleton: Bio-inspiration for 3D printed architectures

Research output: Contribution to journalArticle

Original languageEnglish
Article number20180965
Number of pages12
JournalJournal of the Royal Society Interface
Volume16
Issue number154
DOIs
DateAccepted/In press - 10 Apr 2019
DatePublished (current) - 8 May 2019

Abstract

In Nature, despite the diversity of materials, patterns and structural designs, the majority of biomineralized systems share a common feature: the incorporation of multiple sets of discrete elements across different length scales. This paper is the first to assess whether the design features observed in the hexactinellid sea sponge Euplectella aspergillum can be transferred and implemented for the development of new structurally efficient engineering architectures manufactured by three-dimensional (3D) additive manufacturing (AM). We present an investigation into the design and survival strategies found in the biological system and evaluate their translation into a scaled engineering analogue assessed experimentally and through finite-element (FE) simulations. Discrete sections of the skeletal lattice were evaluated and tested in an in situ compression fixture using micro-computed tomography (mCT). This methodology permitted the characterization of the hierarchical organization of the siliceous skeleton; a multi-layered arrangement with a fusion between struts to improve the local energy-absorbing capabilities. It was observed that the irregular overlapping architecture of spicule–nodal point sub-structure offers unique improvements in the global strength and stiffness of the structure. The 3D data arising from the mCT of the skeleton were used to create accurate FE models and replication through 3D AM. The printed struts in the engineering analogue were homogeneous, comprising bonded ceramic granular particles (10–100 mm) with an outer epoxy infused shell. In these specimens, the compressive response of the sample was expected to be dynamic and catastrophic, but while the specimens showed a similar initiation and propagation failure pattern to E. aspergillum, the macroscopic deformation behaviour was altered from the expected predominantly brittle behaviour to a more damage tolerant quasi-brittle failure mode. In addition, the FE simulation of the printed construct predicted the same global failure response (initiation location and propagation directionality) as observed in E. aspergillum. The ability to mimic directly the complex material construction and design features in E. aspergillum is currently beyond the latest advances in AM. However, while acknowledging the material-dominated limitations, the results presented here highlight the considerable potential of direct mimicry of biomineralized lattice architectures as future light-weight damage tolerant composite structures.

    Research areas

  • Additive layer manufacturing, Composite materials, Lattice structures, Structural efficiency, X-ray micro-computed tomography

    Structured keywords

  • Bristol Composites Institute ACCIS

Download statistics

No data available

Documents

Documents

  • Full-text PDF (final published version)

    Rights statement: This is the final published version of the article (version of record). It first appeared online via The Royal Society at https://doi.org/10.1098/rsif.2018.0965 . Please refer to any applicable terms of use of the publisher.

    Final published version, 2 MB, PDF-document

    Licence: CC BY

DOI

View research connections

Related faculties, schools or groups